RMRC 900MHz-1.3Ghz High Performance Receiver With Custom Tuner

Why buy your video receiver from RMRC?

Covering popular amateur bands including 900MHz, 1.2GHz, and 1.3GHz, our 900MHz – 1.3GHz 15 channel video out perform ALL the other options from all other sources! They may look similar to others you’ll find shipped from China or even US vendors, but NONE compare to our performance. Custom high end components and design modifications make the RMRC Video Receivers the absolute best 1.3GHz, 1.2GHz, and 900MHz receivers you can buy, period. Not to mention the included semi-rigid dipole designed by Video Aerial Systems. 

Custom tuners built specifically for RMRC. 

These RF tuner modules have the better performing narrower bandwidth SAW filters already installed, so a SAW filter upgrade isn’t necessary. Many components for these the video tuners sold for FPV use are no longer in mass production. Because of this, most of the receiver tuners available now are using very cheap copies of the original components or components that were previously rejected due to not meeting the original specifications. Every single one of the tuners we use is built, tested, and modified with the custom SAW filter and guaranteed to meet or exceed the specifications. They cost to us is significantly more than the “generic” tuners because of the extra levels of testing, the building of custom components, and the high standards for passing the testing, but we feel performance and reliability are the most important factors. Video receivers with these tuners are not available ANYWHERE ELSE! We know you will love flying with it!

These other receiver electronics are custom built to Ready Made RC, LLC specifications! They are not the same as similar looking receivers sold by other retailers, as these have multiple internal improvements that we specified. Lots of great improvements over the standard units including:

• RF module and supporting circuitry hardened to improve resistance to UHF RC signals such as Dragon Link, Crossfire, EZUHF, and others. Other receivers on the market can lose the video signal completely when in close proximity to UHF RC transmitters.*
• Custom 1.3GHz dipole antenna designed by IBCrazy! FAR better than the generic whip antennas usually included with these types of receivers.
• Additional frequency that’s legal for US use to allow two users to operate in the 1.3GHz band!*
• Additional channels added to increase compatibility with various available transmitters on the market
• Channels cover almost all available frequencies from 900MHz-1.3GHz.
• SMA Female Connector!  (Not like a lot of the generic versions of these that have F-Connectors that would require an adapter to use with most antennas)

Includes

• RMRC High Performance Receiver
• 3′ RCA audio/video cable
• Custom 1.3GHz dipole antenna designed by Video Aerial Systems! 
• Note: Requires 2.1 barrel connector for power. See related products. 

Channels

• CH0:910MHZ
• CH1:980MHZ
• CH2:1010MHZ
• CH3:1040MHZ
• CH4:1080MHZ
• CH5:1120MHZ
• CH6:1160MHZ
• CH7:1200MHZ
• CH8:1240MHZ
• CH9:1280MHZ
• CHH:1320MHZ
• CHC:1360MHZ
• CHd:1258MHZ
• CHE:1100MHZ
• CHF:1140MHZ

Power Draw at 12v: 300mA

No power supply included.  Requires 12V supply or 3s Lipo battery for power.  See Batteries and Chargers section for available batteries, and Wire & Cables section for compatible 2.1mm ID barrel connectors for power (center positive).

*Special note for Dragonlink, EZUHF, and Crossfire users: Although additional filtering has been added to these receivers to increase their tolerance of UHF signals, it is still recommended that you maintain some distance between your UHF transmitter and this receiver. Other websites selling unmodified versions of this receiver claiming theirs are UHF tolerant have NOT fully tested the equipment with all UHF systems. If you have a UHF system and one of those other “cheap” receivers, just put your UHF system in front of your video receiver antenna and see what happens.